ELCOM Euro-50TE Mini, Руководство пользователя

Страница: 45 / 84

45
Operation in registration mode
Registration using bar codes
• a sale using a bar-code scanner
A bar-code scanning device can be connected to the cash register. The sale of a product using this scanner
consists of simply scanning the bar code on the item‘s packaging. For proper functioning of the bar-code
scanner with the cash register it is necessary to program the parameters of the scanner into the cash regis-
ter (see Programming the cash register – Peripherals).
Example: The sale of 3 identical items using the bar-code scanner.
Sequence of steps Display Receipt

3*
Butter Flora
3*11.00 =33.00 A
scanning of a bar code
3* Butter Flora
33.00
Note:
A bar code must be programmed for the given PLU.
• sale of a product by manually entering the bar code
If necessary, when the bar-code scanner is not functioning or the bar code of an item cannot be read by the
scanner, it is possible to manually enter the bar-code number directly into the register using the keyboard.
Example 1: The sale of a single product with the bar code 8586001760096
Sequence of steps Display Receipt

...

8586001760096
Beer Heineken
1*6.00 =6.00 A

1* Beer Heineken
6.00
Example 2: The sale of 5 units of a product using the bar code 8586001760096.
Sequence of steps Display Receipt

5*
Beer Heineken
5*6.00 =30.00 A

...

5*
8586001760096

5* Beer Heineken
30.00
Entering amounts using electronic scales
The Euro-50TE Mini is capable of reading the weight of products from a connected electronic scale. Com-
munication with a scale is possible only in the „R“ or „T“ modes. An electronic scale is connected to the cash
register through a port which was set in the menu „Peripherals - Scales“.
After initiating communication (reading the weight) with the electronic scale by pressing the button

SCALE
the weight of the product being weighed can be changed (add or remove products) so long as the no other
key has been pressed on the keyboard. After the cash register has read the weight of the goods, simply en-
tering the PLU and press the

(PLU) key. If the weight on the scale is stable or is a negative or zero, the
product cannot be registered.