elco VARION C-POWER 50.0, Руководство по эксплуатации

Страница: 32 / 44

32
Operating manual VARION® C-POWER 50.0 / 09.2019
Cleaning
8. Cleaning
D WARNING!
Risk of burns when cleaning hot system components.
This chapter contains important information regarding the
correct way to clean the system. The parts of the system
that can become very hot (e.g. flue gas routing) must not be
cleaned while the system is in operation.
A
Read this chapter carefully before cleaning the system.
A
Do not clean any hot components.
A
Follow the safety instructions.
The system must only be cleaned by qualified users.
D
“2.2.4 User” (page 6).
D ATTENTION!
Risk of damage caused by cleaning agents.
Sprays, solvents and chlorinated cleaning agents can cause
corrosion and changes in properties.
A
Only use suitable cleaning agents.
At least once a year:
A
Clean the system with a damp cloth.
In the case of heavier soiling:
A
Clean the system with warm water and a neutral,
non-abrasive cleaning agent (domestic washing-up
liquid, pH value 7).
If work that creates considerable dust has being performed
in the installation location (e.g. drilling, abrasive cutting):
A
First switch off the system.
A
Clean the air filter in the generation unit.
A
Clean the ventilation system in the control cabinet.
For questions about cleaning:
A
Contact the manufacturer.