elco FS200 IM Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 59

elco FS200 IM Скачать руководство пользователя страница 59

Chapter 3 Deployment

3-28

Firmware update

For this your firmware is online transferred from the hardware configurator
to the CPU, which passes the firmware on to the according DP slave via
the connected DP master using Profibus.

•

Make firmware file available

•

Load project into the hardware configurator

•

Transfer firmware

The most recent firmware for the DP-V1 slave may be found at

Extract and copy the file

header.upd

into your work directory.

•

Open the hardware configurator with the configured DP slave.

•

Click on the DP slave and choose

PLC

>

Update Firmware

. This menu

option is only available when the highlighted DP slave supports the
function "Update firmware ".

→

the dialog window "Update firmware " appears.

•

Choose your work directory via the button "Search" where the file

header.upd

is stored. Choose

header.upd

.

→

You will see information for which modules and from which firmware

version on the chosen file is convenient.

•

Activate the control field "Activate firmware after loading" because only
then the new firmware is copied to the Flash and click then on [Execute].

→

it is proofed if the chosen file is valid and at positive result the file is

transferred to the DP slave.

Note!

During runtime the firmware update at the DP slave is executed after app.
3s. Please regard that the DP slave executes a reboot, which may cause
the DP master to remain in STOP res. may influence your user application.

Overview

Approach

Supply firmware file

header.upd

Load project into
hardware
configurator

Manual ELCO Intelligent I/O-FS200

www.elco-holding.com.cn in the service area at "Firmware for

system

components" as FS200.zip. Within the ZIP file the package file FS200_

Vxxx.zip with xxx=version may be found.

Siemens CPUs.

like

The firmware update for the DP-V1 slave ELCO FS2-GW-DP00 happens

via Profibus and is only available with CPUs with DP-V1 capability

«
...
57
58
59

Содержание FS200 IM




























































Отзывы:

Нет отзывов