ELCART
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. +39 02.25117310 Fax +39 02.25117610 sito internet: www.elcart.com e-mail: [email protected]
Manuale di istruzioni/Scheda tecnica
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to thr performances and the usa of the product.
La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y no constituyen ningun vinculo de parte de Elcart respecto a las prestaciones y uso del producto.
ART. 07/00683-00
PAGINA 2 DI 2
SOLDERING GUN WITH SOLDER WIRE FEEDER
User's Manual
Art. 07/00683-00
This dual temperature soldering gun is with trigger operated
solder feed. This product perfectly combines a soldering iron and
the solder feeder together. It's two in one design means you can
operate it with a single hand. Pull the trigger and the solder will roll
from the feeder to the tip.
The trigger can precisely adjust the amount of solder being fed to
the tip and dual Hi / Low temperatures (30W / 60W) is designed for
convenient operation.
Features:
• Dual power soldering gun
• One handed trigger action for feeding solder
• Ideal for continuous jobs on production lines, industry use or the
electronic hobbyist
• Soldering wire of Diameter 0.8mm to 1.5mm are all suitable.
• Solder feeder can precisely adjust the amount of soldering wire,
min 3mm(in length) and max 8mm (in length).
• Solder bobbin can easily be replaced in no time at all.
Spare Parts:
1. Plastic roller
2. Fixing button
3. Trigger
4. Hook
5. Hi/Low power button
Replacement TIP: 07/00681-00
How to use:
1. Feed the soldering wire into part 1, then press part 2 until the
wire enter into the hole on the backside.
2. Trigger part 3 until you see the solder wire enter into the part 4
(hook) and reach the tip on the front side.
3. Part 4 (hook) can be used to adjust the wire to ensure the wire is
perfectly located under the tip ready for soldering.
4. Then connect the power, by triggering part 3 and press part 5
(button), you can do your soldering job conveniently.
Note:
You can buckle the trigger to well control the conveying capacity of
soldering wire, from 0.8-1.5mm.
There is a conversion switch of power at the handle of iron.
II is high power, I is low power.
Warning:
1. It is normal that the soldering iron will smoke slightly during
the first use. This is caused by the initial heating of electronic
components within the device. The smoke will disappear after
10minutes.
2. Ensure the soldering iron is kept in a dry environment. It is not
suitable for use outside or working over wet conditions.
3. The soldering iron should not be dropped, dismantled or
modified.
4. If the soldering tip does not solder your component, please tin the
tip with solder paste or use a tip cleaner for better performance.
5. Never dip the tip in muriatic acid. Failure to do this will result in
erosion and affect usage.
6. Always keep tips coated with tin to ensure a long service life.
7. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
8. Children must be supervised to ensure that they do not play with
the appliance.
9. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
User information ex art. 26 D. 49/2014
The symbol labelled on the appliance (Annex IX D. 49/2014) indicates that
the rubbish is subject to “separate collection” and it has been placed on the
Italian market after the December 31, 2010.
The user must therefore assign or (have collected) the rubbish to a
treatment facility according to indications by the local administration, or
hand it over to the reseller in exchange for an equivalent new product. The
separate collection of the rubbish and the subsequent treatment, recycling
and disposal operations encourage the production of appliances made
with recycled materials and reduce negative effects on health and the
environment caused by improper treatment of rubbish.
In the case of very small WEEE (no external dimension more than 25 cm),
the user is eligible to get free of charge assignation to retail shops with
sales areas relating to EEE of at least 400 m².
Made in China
IMPORTED AND DISTRIBUTED BY:
ELCART DISTRIBUTION SPA
Via Michelangelo Buonarroti, 46
20093 COLOGNO MONZESE (MI)
ITALY
www.elcart.com - [email protected]
