2
Contents
Page
3) DESCRIPTION OF THE MAIN COMPONENTS. Obstacle detection system, battery charging, dip switch
Programmable Functions, Terminal legend and general PCB schematic.
4) Terminal Descriptions
5) Trimmers and Dip Switch
6) Fuses
7)
Wiring the 207 controller
8) About Photocells
9) Wiring the photocells
10) Programming the 207C circuit board
11) Automatic programming of working times and slowing speed
12&13) Manual programming of working times and slowing speed
14) Programming automation closing
15&16) Wireless Keypad Programming
17) UNAC safety guide
If any welding takes place during your build, it is essential that any cabling is isolated totally from the
control panel.
It is also best practice to use the correct suitable cable glands and conduit from only the bottom of the
enclosure along with silicone of any gaps to avoid any insect infestation.
