Elba ESO-2633BI, Руководство пользователя

Страница: 6 / 13

6
④
For the most efficient air circulation, the oven should be fitted according to the
dimensions shown.
⑤
The rear of the steam oven must be empty so that air can circulate freely. The rear
panel to where the steam oven is fitted should have a gap of at least 70 mm away.
⑥
Do not switch on the appliance before it is has been fully and correctly installed.
WARNING: The power socket must be connected to a switch with earth. If the power cable
is damaged, please contact a qualified electrician for replacement.
7. INSTRUCTION FOR COOKING
Step 1: Adding Water
*
Before using the steam oven, it is recommended to flush the built in water tank. Refer to
Section 9: Cleaning and Maintenance.
1
、
Make sure the appliance is under normal operation mode.
2
、
Push and eject the knob
⑩
to access water filling point, then fill water with a measurement
jug to the suitable amount of water depending on the cooking time required.
3
、
WARNING: Please use only purified water, mineral water or distilled water to avoid the
water system getting blocked or stained.
4
、
Note: The capacity of the water tank is 1.0 litre, which can last for approx. 1.5hours. Alarm
beeps and will start flashing when the water added reaches maximum water level. To
avoid wasting water or possible spillage, please add only an appropriate amount of water
based on the cooking time, e.g. if the cooking time is 30 minutes, then you only need to pour
about 500ml of water into the water tank.
Step 2: Set the Time
1
、
Press and hold TIME button
⑦
to set the time of day (for first time usage only);
2
、
Press TIME button
⑦
once to program delay start, and symbol
will flash, then press “+”
or “-”buttons to set the delay start timer;