Elation PLATINUM SPOT LED II Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 52

Elation PLATINUM SPOT LED II Скачать руководство пользователя страница 12

PLATINUM SPOT LED II ™

©Elation Professional, Los Angeles Ca.

12

www.ElationLighting.com

13.3-Pin DMX Output Jack – This jack is used to send an incoming DMX signal to the

next fixture in the DMX chain via a female, 3-pin XLR jack.

14.5-PIN DMX Input Jack – This jack accepts an incoming DMX signal via a male, 3-pin

XLR

jack.

15.5-Pin DMX Output Jack – This jack is used to send an incoming DMX signal to the

next fixture in the DMX chain via a female, 3-pin XLR jack.

16.Power Switch – This comes with both a main power and DC power switch. This switch

controls main bus power to the unit.

17.Fuse Holder Assembly – This assembly houses the 4amp GMA safety fuse. Always

replace the fuse with an exact match unless otherwise specified by an authorized

Elation Service Technician. Using a fuse other than that specified could seriously

damage the unit and will void your manufactures warranty.

18.Power In –This lead is the main power input lead. When the unit is the first in a chain or

the only fixture to be used, be sure to use the power starter.

19.Power Out –This lead is used to jump power to another ELAR 180 Par RGBAW™.

Please do not daisy chain power for more than 16 fixtures. To maintain the integrity of

the IP rating, only use proper Elation IP rated power cables.

«
...
10
11
12
13
14
...
»

Содержание PLATINUM SPOT LED II





















































Отзывы:

Нет отзывов