INSTALLATION INSTRUCTION
Remove the outer packaging and check this product
for damage prior to installation. No claims can be
made after the product has been fitted.
1)
Position the mirror in suitable location (see zone
diagram on reverse). Ensure that the electrical mains
supply is within reach of the electrical entry point of
the mirror.
2)
Mark the position of the mirror using a pencil.
Remove the mirror and mark the mounting points
according to the dimensions, see Figure A.
3)
Drill through the marked points using an 8mm
masonry drill, ensuring there are no hidden cables or
pipes behind.
4)
Insert the wall plugs into the wall holes. Screw the
supplied screws into the wall plugs.
5)
Connect the domestic mains supply to the terminal
box according to the wiring diagram, see Figure C on
the reverse of this instruction.
6)
Hang the mirror in final position.
OPERATIONAL INSTRUCTION
Power On / Off & Dimmer Function
Power on by touching the Dimmer switch on the
mirrored glass, see Figure B.
To increase the brightness keep touching the Dimmer
switch and hold until desired brightness is reached.
To reduce the brightness stop your hold, then touch
the Dimmer switch again and hold until the brightness
has been reduced as desired. Release and touch the
Dimmer switch again to turn off the mirror.
Demister Function
Power the demister function by touching the Demister
switch on the mirrored glass. Release and touch the
Demister switch again to turn off the demister.
62A11-BLK / 62A11-SIL
ROUND LED ILLUMINATED MIRROR
Elation Bathrooms, Riverside Business Park, Keighley, West Yorkshire, BD21 4AF
www.elationbathrooms.co.uk
Mirror Back - Mounting Points
IMPORTANT - PLEASE READ
It is recommended that all electrical bathroom
products are fitted by a reputable qualified
electrician. Before any electrical connections are
made, the electricity supply MUST be turned off.
200
49
5
Figure A
Figure B
Dimmer
Switch
Demister
Switch
Mirror Front - Switches
CONTENTS
x1 LED
Mirror
x2
Fixing Screws
x2
Wall Plugs
x2 Wire
Connectors
