![Elatec TWN3 LEGIC NFC M Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/elatec/twn3-legic-nfc-m/twn3-legic-nfc-m_user-manual_2375779011.webp)
© 2022 ELATEC GmbH – TWN3 LEGIC NFC M user manual DocRev3 – 02/2022
Page
11
of
14
high frequency energy or other legal interference from radio
transmitters (stations);
(5) Should the product cause harmful interference on other legal
radio transmitters (stations), product use must be discontinued
immediately and suitable measures must be taken prior to using
the product again in order to eliminate said interference;
(6) When using micropower devices inside of an aircraft or
radiometric observatories, or when using such devices in
meteorological radar stations, satellite ground stations (including
measuring and control stations, distance measuring stations,
receiving stations, or navigation stations), as well as in radio
transmitters (stations) used by the military and electromagnetic
environment protections zones at airports, all applicable
provisions of the competent authorities as well as statutory
provisions, national regulations, and national standards must be
complied with;
(7) Remote controls of any kind may not be used within 5000
meters of airport runways, measured from the middle of the
runway;
(8) Ambient conditions such as temperature and voltage when
using micropower devices:
operating voltage of
TWN3 LEGIC NFC M
: 5.0 V ± 10%
(charging via USB),
operating temperature: -25 °C – 80 °C,
storage temperature: -45 °C – 85 °C.
The user must strictly adhere to these temperature and voltage
specifications when using the product.
(六)在航空器内和依据法律法规、国家有关规定、标
准划设的射电天文台、气象雷达站、卫星地球站(含测
控、测距、接收、导航站)等军民用无线电台(站)、
机场等的电磁环境保护区域内使用微功率设备,应当遵
守电磁环境保护及相关行业主管部门的规定;
(七)禁止在以机场跑道中心点为圆心、半径
5000
米的
区域内使用各类模型遥控器;
(八)微功率设备使用时温度和电压的环境条件。
TWN3 LEGIC NFC M
的工作电压
5.0V
± 10%
(
USB
供
电),
工作温度
-25
℃
~80
℃,
储存温度
-45
℃
~85
℃。
用户需严格按照此温度和电压要求使用。
6.4
UNITED KINGDOM
TWN3 LEGIC NFC M complies with the requirements of the UK legislations and other regulations as listed in the respective UK
declaration of conformity. The importer is responsible for applying the following information to the packaging of the product:
•
the importer company’s details, including the company’s name and a contact address in the United
Kingdom.
•
UKCA marking
6.5
FURTHER STATEMENTS
Should the device be certified and installed in the following countries or regions, the corresponding statements (see below) must be
contained in the user manual.
Содержание TWN3 LEGIC NFC M
Страница 1: ...TWN3 LEGIC NFC M USER MANUAL ...