EL-4KHDBT-RX-40-18G
QUICK REFERENCE GUIDE
© 20
22 ELAN
®
is a registered trademark of Nortek Security & Control LLC. All rights reserved.
RevA2_QRG_ELAN_EL-4KHDBT-RX-40-18G_PrintReady
Panel Description
Understanding the EL-4KHDBT-RX-40-18G HDBaseT status lights
ELAN HDBaseT extender solutions include status LED indicators on both the Matrix/Transmitter and Receiver products to show all connections are
active and to help diagnose possible problems.
Understanding the Status Lights
Receiver:
• HDMI signal link light will be off when there is no connection with a display/sink
• HDMI signal link light will be on when there is an active connection with a display/sink
• HDBaseT green light will be lit if there is a stable connection between the Transmitter/Matrix and Receiver
• HDBaseT orange light will be lit when the receiver is powered by Transmitter/Matrix
Transmitter/Matrix:
• HDMI signal link light will be off when there is no connection with a source device
• HDMI signal link light will be on when there is an active connection with a source device
• HDBaseT green light will be lit when transmitting signal with HDCP
• HDBaseT green light will blink when transmitting signal with no HDCP
• HDBaseT orange light will be lit if there is a stable connection between the Transmitter/Matrix and Receiver
The ELAN
®
EL-4KHDBT-RX-40-18G HDMI 2.0 4K 60Hz 4:4:4 (18Gbps) HDCP 2.2 HDBaseT ARC Receiver offers market leading features and
outstanding value utilizing CSC technology. The product extends HDMI, bi-directional IR & RS-232 and is powered by the matrix up to lengths of
70m (4K 40m). The receiver features ARC support when used with compatible ELAN control system hardware and simultaneous analog stereo and
Optical Toslink audio breakout.
1
Power Status Indicator
2
HDMI Signal Link Indicator
3
Power over Cable (PoC) Switch (On/Off) - To enable/disable
PoC being sent from or received by the receiver
4
ARC Mode Selection Switch - Alters PoC mode when used
with compatible ARC enabled Matrix products such as EL-
4KPM-V88-A268-18G
5
Optical Audio Input - Toslink audio input. Connects to the
optical output of the local display device for Audio Return
Channel with compatible matrix
6
RS-232 Port Mode Selection Switch - Firmware upgrade
mode or normal operating mode.
7
HDBaseT Input
8
RS-232 3-pin Phoenix Connector
9
IR IN (to ELAN 5V 3.5mm IR receiver)
q
IR OUT (to ELAN 5V 3.5mm IR emitter)
w
HDMI Output - connect to HDMI on display
e
Optical Toslink audio output - Connects to local AV amplifier
and allows local HDMI audio breakout
r
Analog Audio Left / Right Output - 3.5mm stereo jack
de-embedded audio from HDMI input. Supports stereo 2ch
PCM audio only
t
12V/1A DC Power Input Screw Type Connector
1
EL-4KHDBT-RX-40-18G
Quick Reference Guide
L/R OUT
OPT OUT
HDMI OUT
IR OUT
IR IN
RS-232
HDBT
IN
12V 1A
TX
RX
HDMI
PoC
ON OFF
OPT IN
NORMAL UPGRADE
MODE
ARC
EL-4KHDBT-RX-40-18G
ON OFF
Front
Rear
2
3
4
5
6
7
8
q
w
e
r
t
9
RevA2_QRG_ELAN_EL-4KHDBT-RX-40-18G_Working.indd 1
RevA2_QRG_ELAN_EL-4KHDBT-RX-40-18G_Working.indd 1
25/02/2022 11:12
25/02/2022 11:12