ASSEMBLY INSTRUCTIONS
5
4.
Pass canopy (A) over the threaded nipple
(D) protruding from the mounting bracket
(B) and secure in place with threaded cap
(DD).
5.
Insert 40-watt max. G9 Bulb (H) into socket
(C). Screw bulb cover (G) onto socket (C).
x 1
DD
Threaded
Cap
Hardware Used
A
B
D
DD
4
5
G
H
C
3. Mounting surface should be clean, dry, flat and
1/4 in. larger than the canopy (A) on all sides.
Any gaps between the mounting surface and
canopy (A) exceeding 3/16 in. should be
corrected as required with silicone caulking
compound. Caulk completely around where the
back of canopy (A) meets the wall surface to
prevent water from seeping into outlet box.
A
3