background image

111

User manUal

Control panels and signalling equipment

TACÓRA seRies

1  

 DeCLARATiON  OF  CONFORMiTY 

AND PeRFORMANCe

13

TA1002: No. 0051 – CPR – 0402

TA1004: No. 0051 – CPR – 0403

TA2000: No. 0051 – CPR – 0401

17

TA4000: No. 0051 – CPR – 0515

Standards: EN 54-2:1997/A1:2006

EN 54-4:1997/A1:2002/A2:2006

2  

 GeNeRALs

TACÓRA series control and signalling equipment can man-

age a fire detection system devices, monitoring up to 45 

different zones.

Model

TA1002 TA1004 TA2000 TA4000

MCP (call points)

1

1

1

1

Conventional zones

2

4

12

4

Analogue-addressable 

loops

-

-

1 (zones 

13-44)

2 (zones 

5-44)

Total zones

3

5

45

45

Control panels are compatible with EXTING extinguishing 

module and MDGSME SMS sender module.

3  

 ACCess  LeVeLs

Panels functions can be accessed according to three differ-

ent access levels:

•   level 1 (public) – no password needed

•   level 2 (user) – dedicated key required

•   level 3 (maintenance/programming) – accessible for au-

thorised personnel only

Level 1 grants access to all functions available to everyone, 

such as those for panel general monitoring.

At level 2, setup menu will be displayed.

To go back to level 1, turn and remove the key.

If a control panel at level 2 receives no inputs from the front 

keypad for 15 minutes, the LCD backlight will start blinking 

and the last row of the display will show "Panel on level 2" 

message.

Pressing any keys makes the message disappear for 15 min-

utes, but the display will keep blinking until the panel goes 

back to level 1.

4  

 FRONT  PANeL

The control panels can be managed by the front keypad or 

by a connected TAREPEATER keypad.

All status and functions of the control panels are shown and 

managed via panel LCD and the coloured LED indicators.

The available control buttons provide for easy configuration 

and control operations.

The display backlight colour will change according to panel 

status.

GREEN - standard working mode

Содержание TA1002









Отзывы: