- 10 -
Thermal Grease
STEP 1
Apply the enclosed EK-TIM Ectotherm thermal grease (thermal
compound) on the CPU heat spreader – IHS – as shown in the
image. The layer of the thermal compound must be thin and even
in thickness over the entire surface of the IHS.
The excessive or uneven application of thermal grease
may lead to poor performance!
STEP 1
APPLYING THERMAL COMPOUND
For this step, you will need:
PREPARING THE WATER BLOCK FOR INSTALLATION
STEP 1
Unscrew four (4) Velocity
2
mounting nuts (turn them in an
anticlockwise direction to unscrew). Remove the backplate and
save it for later steps. After the backplate is removed, do not
forget to peel off the protective sticker.
STEP 1
PROTECTIVE
STICKER
BACKPLATE