/ 30 /
FILLING THE SYSTEM FOR THE FIRST TIME
STEP 1
Preparing the Cooling Liquid.
The coolant comes in the concentrated form. To prepare the cooling
liquid, you must take 100mL of clear coolant concentrate (comes
enclosed with the Kit) and mix it with 900mL of distilled water.
Make sure you mix it properly before pouring it into your water
cooling loop.
Store the remaining liquid into a PET bottle. Do not use any
food or beverage container!
STEP 2
Remove the top cover of your reservoir by unscrewing it in a counter-
clockwise direction.
It is recommended to protect the exposed hardware with a
few paper towels in case there is a leak, or you accidentally
spill the coolant while pouring it.
Take the pre-mixed coolant and pour it into the reservoir until the
coolant level is about 2cm below the top.
For pouring the pre-mixed coolant into the reservoir, you may use
the enclosed 500mL filling bottle.
H
2
0
1
9
STEP 1
STEP 2
