/ 27 /
ELECTRICAL CONNECTIONS
CONNECTING THE PUMP-RESERVOIR UNIT
STEP 1
Take the 4-pin PWM female connector and plug it to the male PWM
header located on the motherboard.
Always try to use CPU-dedicated fan headers. On the
majority of motherboards, these headers offer the best
PWM regulation.
CONNECTING THE FANS
STEP 1
To connect the fans, you might need an EK-Cable Y splitter.
The EK-Cable Y splitter comes enclosed with the Kit.
Connect the female connectors from the fans with male connectors
on the fan splitter cable.
STEP 1
STEP 1
