/ 15 /
STEP 1
STEP 2
Intel® Socket
Mounting Plate
AMD® Socket
Mounting Plate
M4x14
Screws
Copper Base
Orientation
STEP 2
Replace the factory-installed Intel® mounting plate with the AMD®
one. You will feel the mounting plate locking into position when
placed correctly onto the top.
Reseat the O-ring gasket into the gap between the mounting plate
and water block top.
Pay special attention to the orientation of the copper base.
It should be placed as shown in the picture.
Reinstall the M4x14 screws and use the 2.5mm Allen key in the
clockwise direction to screw them in.
AMD® SOCKET MOTHERBOARDS
STEP 1
Replacing the Mounting Plate
Place the water block on an even surface and, using the 2.5mm Allen
key in the counter-clockwise direction, remove four M4x14 DIN 7991
screws attaching the copper base to the top.
