UNIVERSAL 1000
FOR TV-VCR-SAT-CTV:
Manual Programing:
1-put batteries in the control and turn on the TV or VCR or SAT or CTV and
point the control at it
2-look at the name of the TV or VCR or SAT or CTV in the codes table and
see its code
3-press (POWER) and (MUTE) at the same time until the indicator lights up
4-press the device name TV or VCR or SAT or CTV that you want
5-enter the code you need the light will go off
6-try the control
Auto Programing:
1-put batteries in the control and turn on the TV or VCR or SAT or CTV and
point the control at it
2
-press (POWER) and (MUTE) at the same time until the indicator lights up
3-press the device name TV or VCR or SAT or CTV that you want
4-enter the following code: -TV: 9991 -VCR: 9992 -SAT: 9993 -CTV:
9994
5-press (POWER) many times one by one watch the
TV or VCR or SAT or CTV
and
when the device power off press
the device name TV or VCR or SAT or
CTV that you pressed before
Note: you have to stop pressing (POWER)
directly when the device power off
6-
try the control if it did not work good repeat the operation again
