Ekra E1-II, Системное руководство

Страница: 69 / 116

Kapitel 6 Maintenance
6-1
©
EuroDok 06_Wartung.fm
Druck 23.10.08
E1-II semiautomatic screen printer
System Manual
fon
+4
9 (0
) 625
2 -
6
9
5
0
1
fa
x
+4
9 (0
) 625
2 -
6
9
5
0
3
m
ai
l@
eu
ro
do
k.de
Eu
ro
Do
k G
m
b
H
D
a
rm
st
ädt
e
r St
raße
67
D-64
646
Heppe
nh
e
im
6 Maintenance
6.1 Generals
The functions of the individual components of the machine mostly de-
pend on the quality of the cleaning and maintenance. Insufficient mainte-
nance causes unnecessary wear and may result in a decrease in
production time because the machine is not in operation.
Maintenance must be performed in cycles of eight hours. However, short-
er maintenance periods are required where room temperatures are high
and where the materials used cause a considerable build up of dust.
i
Note!
Check the pressure on the gas pressure dampers on the cover daily.
Cover must remain in position.
Replace the shock-absorbers punctually.
WARNING!
If pastes containing solvent are used, customers must check to what extent
these solvents do not influence the lubricants.
DANGER!
Dangerous electric voltage!
Before commencing maintenance work, care must be taken to ensure that the
main switch is switched off and secured so that it cannot be switched on again
inadvertently
‰
Switch the printer on at the main switch.
‰
Open the front cover.
‰
Switch off the main switch (“O” position).
⇒
The printer is switched off.
i
Note!
Only expert personnel who have received relevant training are permitted
to carry out maintenance work.