For the proper use of the product, the damage of hazards and the degree of
damage caused by improper use are classified as follows:
Notice
Thank you for purchasing the AYOUND Eco-o2 LED Lantern.
This product is a lighting fixture that has been developed for the lighting
of tents, tarps, PC works, or indoor mood lamps. Please read and fully
understand this manual to safely and properly use this product.
Please keep this manual in a safe place for future reference.
사용설명서
User’s MaNUal
DaNGer
MaiNteNaNce
troUbleshootiNG
QUality assUraNce
WarNiNG
safety Precautions
Symbol
Precautions Scope
DANGER
This symbol denotes a potential hazard that will result in serious injury or death.
WARNING
This symbol denotes a potential hazard that could result in serious injury
or death in some cases.
CAUTION
This symbol denotes a hazard that could result in injury or damage of the main
part and other parts.
caUtioN
EKOMOS Inc., Hanyang University Start-up Incubator Center,
55, Hanyangdaehak-ro, Sangnok-gu, Ansan-si,
Tel. +82-31-400-3936 Fax. 0303-3443-8390
ayoUND eco-o2
User’s Manual
Keep it out of reach of infants and children.
Be careful for infants and children not to mistake it as a toy.
(Ingestion of parts may lead to injury.)
Do not insert metals into the connector part or the connector terminal.
(Doing so may cause overheating, fire, or electric shock.)
Do not disassemble or modify it.Never disassemble or modify it.
(Doing so may cause electric shock.)
Do not replace the batteries or touch the connector part with wet hands.
(Doing so may cause overheating, fire, or electric shock.)
Close supervision of a guardian or an adult is advised to prevent children from
using the product. (It may cause an injury or electric shock to children when they
use the product without supervision of adults.)
Maintain the product regularly so that it will be clean and ready for next use.
Carefully wipe out dirt with a wet cloth.
Wipe out the external terminal with a dry cotton swab or cloth.
If the main part is wet, completely dry it first with a soft cloth before storage. If water gets
into the USB connector or the main part, immediately stop using the product, and contact our
customer service center.
If the product will be stored and will not be used for a long time, turn off the BT button and
the CHARGE button. (Check for the function indicator lamp.)
We double-check the quality of our products to make sure that they are safe to use. However,
if a purchased product does not work properly, contact us or the store where you made your
transaction. In case of manufacturing defects, it will be repaired free of charge or replaced.
For other cases, it will be repaired at reasonable prices, so please bear with us. Please be
aware that it would not be repaired or replaced for the following cases:
A fall or a shock causes an accumulation of damages on the main part and, thus, unexpected
malfunctions during use.
Be careful not to apply excessive force or shock to the main part.
1. Life cycle by damages due to the aging of materials
2. Malfunction due to modification and poor handling
3. Malfunction due to prohibited handling as described on the manual
4. Malfunction due to unexpected accidents
5. Product malfunction due to other manufacturing defects
6. Malfunction due to pollution or rust
7. Malfunction due to disassembly
8. Malfunction due to part deformation and damage because of a fall or other shocks
9. Malfunction due to the change of parts because of abrasion
10. Malfunction due to the use of the product with the products of other companies
The lantern does
not turn on
The batteries are
discharged.
Check the residual quantity of the batteries,
and recharge the device.
The terminal is dirty.
If the terminal that gets into contact with the
batteries is dirty, clean the product with a dry
cloth.
The product is
out of order.
Immediately stop using the product, and contact
our customer service center.
Others
Do not swing the main part while using it.
(The main part may fly into unexpected places and cause accidents.)
Do not use the main part in wet places. Do not pour water on it.
(Doing so may cause electric shock or malfunction.)
Make sure to prepare a spare light source and batteries in the places where the
light of lanten plays a key role.
Do not use it beyond the recommended usage temperature.
(Doing so may cause a leak of the battery liquid or heating of the batteries, or fire.)
Do not use it in places with high temperature such as those nearby flammable
substances or heaters.
(Doing so may cause overheating and fire due to disconnection or short circuit.)
When using external power, do not use in places with dripping water.
(Doing so may cause overheating, fire, or electric shock.)
Connect this product only to the power source designated as a rated external
source (DC5C 2A). (Doing otherwise may cause overheating or fire.)
Problem
cause
action
