6
4.
Check and refill hydraulic oil
Recommended hydraulic oil model according to temperature:
Ambient
temperature
–5
℃~25℃
>25
℃
mark
HVLP 32
,
DIN 51524
HLP 46
,
DIN 51524
Viscosity
28.8-35.2
41.4 - 47
Oil
19-20L
Waste materials such as waste oil, waste batteries or other materials must be treated and recycled in
accordance with national regulations and returned to the recycling company for recycling if necessary.
The oil level should not be lower than the minimum amount required to start the vehicle.
Fill up to refueling point if necessary
。
5.
Fault analysis
If the vehicle continues to malfunction, follow the instructions of the manual.
6.
Common fault analysis
Fault
Cause
maintenance
Vehicles cannot
move
The battery connector is not
connected
Check the battery connector and
connect it if necessary
The electric lock switch is in "OFF"
position
The electric lock switch is placed in the
"0" position
The emergency stop switch is not
on
Turn on the emergency stop switch
Battery running out
Check the charging status of the
battery and recharge it if necessary
The forklift is charging
Interrupt charging process
Fuse damage
Check fuse
Foot pedal switch not pressed;
handle safety switch not pressed
Step on the pedal switch and press the
handle safety switch
Содержание EK18RF
