Ekinex EK-ES2-TP, Руководство по применению, Страница: 41 / 100

Application manual
Air quality multisensor and regulator EK-ES2-TP
Release 1.0 - Updated: 14/02/2020 Application Manual
© EKINEX S.p.A. - All rights reserved Page 41
7.7.2
Heating
The Heating folder includes the following parameters:

Comfort temp. setpoint [°C]

Standby temperature setpoint [°C]

Economy temp. setpoint [°C]

Building protection temp. setpoint [°C]

Heating type

Control type

Hysteresis [K]

Hysteresis position

Cyclic sending interval

Proportional band [0,1 K]

Integral time [min]

Signal

PWM cycle time

Min. change of value to send [%]

Min. control value [%]

Max. control value [%]

Floor temperature limitation

Temperature limit [°C]

Hysteresis [K]

Auxiliary heating

Communication object

Disabled from bus

Offset from setpoint

Hysteresis [K]

Cyclic sending interval

Ventilation for auxiliary heating
7.7.2.1
Parameter and communication object tables
Conditions: Settings

Thermostat function = heating or both heating and cooling.
Parameter name Conditions Values
Temperature setpoint [°C] Setpoint type = single
21
[range
10 … 50]
Building protection temp. setpoint [°C] Setpoint type = single
7
[range
2 … 10]
Comfort temp. setpoint [°C] Setpoint type = absolute or relative
21
[range
10 … 50]
Standby temp. setpoint [°C] Setpoint type = absolute or relative
18
[range
10 … 50]
For a correct operation of the device the standby temperature setpoint has to be <
comfort temperature setpoint.