Ekinex EK-DF2-TP, Руководство по применению

Страница: 17 / 22

Application manual
Presence / movement sensors EK-DF2/DG2-TP
Rev. 1.2 - 2020-02-06 MAEKDF2DG2TP_EN
© Ekinex S.p.A.
– All rights reserved
Pag. 17
Parameter name Conditions Values [Default]
Behaviour at switching off
lock by communication
object
Device type = Master
No reaction
Switch off
Switch on
Value used as output when the alarm status is switched to OFF.
14 Elenco oggetti di comunicazione ETS
CO
number
Object name Conditions Size Flags DPT
1 Slave input - Slave motion
Device type = Master
1 bit C-W-- [1.017] Trigger
2 Slave output - Slave motion
Device type = Slave
1 bit CR-T- [1.001] Switch
3 Test output
Device type = Master
1 bit CR-T- [1.001] Switch
4 Measured lux value output
Device type = Master
2 bytes CR-T-
[7.013]
Brightness [Lux]
5 C1 Manual Input
Device type = Master
External Switch = Yes
Light Control Output C1
= enabled
1 bit C-W-- [1.001] Switch
6 C2 Manual Input
Device type = Master
External Switch = Yes
Light Control Output C2
= enabled
1 bit C-W-- [1.001] Switch
7 C3 Manual Input
Device type = Master
External Switch = Yes
HVAC Output C3 =
enabled
1 bit
C-W--
[1.001] Switch
8 C4 Manual Input
Device type = Master
External Switch = Yes
HVAC Output C4 =
enabled
1 bit C-W-- [1.001] Switch
9 C1 Light Control Output
Device type = Master
Light Control Output C1
= enabled
1 bit CR-T- [1.001] Switch
10
C1 Light Control Dimming
value
Device type = Master
Light Control Output C1
= enabled
1 byte CR-T-
[5.001]
Percentage
(0..100%)
11 C1 Constant Light Control
Device type = Master
Light Control Output C1
= enabled
4 bit CR-T-
[3.007]
Dimming control
12 C2 Light Control Output
Device type = Master
Light Control Output C2
= enabled
1 bit CR-T- [1.001] Switch
13
C2 Light Control Dimming
value
Device type = Master
Light Control Output C2
1 byte CR-T-
[5.001]
Percentage