EKF SC4-CONCERTO, Руководство пользователя

Страница: 62 / 99

User Guide • SC4-CONCERTO • CompactPCI
®
Serial CPU Board
Board Control and Status Registers (BCSR)
A set of board control and status registers allow to program special features on the SC4-CONCERTO:
▸
Assert a full reset
▸
Control activity of front panel reset and power event button
▸
Program time-outs and trigger a watchdog
▸
Get access to two LEDs in the front panel
▸
Get power fail and watchdog status of last board reset
The register set consists of five registers located on the SMBus at Device ID=0x5c on the following
addresses:
▸
0xA0: CMD_CTRL0_WR: Write to Control Register 0 (Write-Only)
▸
0xA1: CMD_CTRL0_RD: Read from Control Register 0 (Read-Only)
▸
0xB0: CMD_STAT0_WR: Write to Status Register 0 (Write-Clear)
▸
0xB1: CMD_STAT0_RD: Read from Status Register 0 (Read-Only)
▸
0xB2: CMD_STAT1_WR: Write to Status Register 1 (Write-Clear)
▸
0xB3: CMD_STAT1_RD: Read from Status Register 1 (Read-Only)
▸
0xC1: CMD_PLDREV_RD: Read from PLD Revision Register (Read-Only)
To prevent misfunction accesses to the registers should be done by SMBus “Byte Data” commands.
Further writes to read-only or reads to write-only registers should be omitted.
© EKF -62- ekf.com