EKF PC7-FESTIVAL, Руководство пользователя

Страница: 93 / 108

User Guide • PC7-FESTIVAL • CompactPCI® PlusIO CPU Board
P-HSE1
High Speed Expansion P-HSE1
CFG_12
5)
a1 b1 CFG_34
5)
1_SATA_PCIE_TXP a2 b2 3_SATA_PCIE_TXP
1_SATA_PCIE_TXN a3 b3 3_SATA_PCIE_TXN
GND a4 b4 GND
1_SATA_PCIE_RXN a5 b5 3_SATA_PCIE_RXN
1_SATA_PCIE_RXP a6 b6 3_SATA_PCIE_RXP
GND a7 b7 GND
2_SATA_PCIE_TXP a8 b8 4_SATA_PCIE_TXP
2_SATA_PCIE_TXN a9 b9 4_SATA_PCIE_TXN
GND a10 b10 GND
2_SATA_PCIE_RXN a11 b11 4_SATA_PCIE_RXN
2_SATA_PCIE_RXP a12 b12 4_SATA_PCIE_RXP
GND a13 b13 GND
1_USB2_P a14 b14 2_USB3_TXP
1_USB2_N a15 b15 2_USB3_TXN
GND a16 b16 GND
2_USB2_P a17 b17 2_USB3_RXP
2_USB2_N a18 b18 2_USB3_RXN
GND a19 b19 GND
1_2_USB_OC#
6)
a20 b20 PCIE_CLK_P
PLTRST# a21 b21 PCIE_CLK_N
+3.3VS
1)
a22 b22 +5VS
1)
+3.3VS
1)
a23 b23 +5VS
1)
+3.3VA
3)
a24 b24 +5VA
2)
+12VA
4)
a25 b25 +12VA
4)
1) Power rail switched on in S0 state only
2) Power rail passed through from J1 backplane con5V
3) Power rail passed through from J1 backplane con3.3V (if supported from power supply)
4) Power rail passed through from J1 backplane con12V (not usually supported from power supply)
5) CFG_12/CFG_34: GND configures to SATA, OPEN or HIGH configures to PCIe
6) Signal is 3.3V tolerant only
© EKF - 93 - ekf.com