- 14 -
STEP 1
CUTTING AND PLACING THERMAL PADS
Thermal Pad F – 0.5 mm (120 x 16 mm)
120mm
16
mm
0.5 mm
Thermal Pad F – 1.0 mm (120 x 16 mm)
120mm
16
mm
1 mm
STEP 1
EK-Momentum
2
ROG Maximus XIV Hero D-RGB water block comes
with thermal pads that have to be cut into smaller pieces to cover all
the regulation areas (Mosfet) on the water block. EK made sure to
provide you with more than an adequate quantity of thermal pads to
complete this Step.
Please remove the protective foil from both sides of the
thermal pads prior to installation!
Replacement thermal pads:
Thermal PAD F 0.5 mm - (120 x 16 mm) – 3830046996725
Thermal PAD F 1.0 mm - (120 x 16 mm) – 3830046996732
For this step, you will need:
Scissors
Thermal Pad - 120 x 16 x 1.0 mm
F1
Thermal Pad - 120 x 16 x 0.5 mm
F0.5
F1
F1
F0.5
F0.5
