Eizo Raptor SQ2801, Руководство пользователя

Страница: 12 / 59

2.2 Installing the Monitor
The Raptor SQ2801 is currently offered in two versions - desktop version and chassis version. Both
these version are discussed in this section.
The desktop version is a “standalone” unit that can be placed on top of a desktop console. As for the
chassis version, it is easy to integrate it onto the rear of control panel or a console by using two
mounting brackets.
Please note the following for safe and proper operation:
Ambient Temperature
In order for the LCD monitor to maintain an optimum operating temperature while in use, air must be
allowed to circulate freely around the Raptor SQ2801 enclosure. This is especially important for the
rear of the unit. Convection current must be allowed to circulate around the enclosure.
Please bear in mind that increased temperatures may result in on-screen defects and significantly
reduced lifetime of the panel.
EMC – Radiation
The LCD monitor is a piece of equipment designed for integration into an industrial system. The
operator of the entire plant is responsible for maintaining electromagnetic compatibility according to
EMC laws.
Safety Aspects
All voltage and signal connections must adhere to legal requirements.
Ergonomics
The screen comes with anti-reflective glass. However, it should be installed/positioned properly to
allow easy viewing from all sides.
Mechanical Integration
The chassis version is secured into a system by 6 bolts (M6 x 10). These bolts can be used for
attaching mounting angles which allow mounting the monitor in a control panel or a console (see Fig.
4, Page 14). The dimensions in the drawings are all in mm.
12 2
General Installation