background image

6

PRECAUTIONS

 CAUTION

Handle with care when carrying the unit.

Disconnect the power cord and cables when moving the unit.  Moving the unit with the cord attached is 
dangerous.
It may result in injury.

Carry or place the unit according to the correct specified methods.

• 

When carrying the unit, grasp and hold firmly as shown in the illustration below.

•  Do not unpack or carry the unit only by a single person, since the large size unit is so  

heavy.

Dropping the unit may result in injury or equipment 

 

damage.

Do not block the ventilation slots on the cabinet.

•  Do not place any objects on the ventilation slots.
•  Do not install the unit in a closed space.
•  Do not use the unit laid down or upside down.

Blocking the ventilation slots prevents proper airflow and may result in fire, electric 
shock, or equipment damage.

Do not touch the plug or AC adapter with wet hands.

Doing so may result in electrical shock.

Use an easily accessible power outlet.

This will ensure that you can disconnect the power quickly in case of a problem.

Mind that the AC adapter becomes hot during use.

•  Do not cover or place anything on top of the AC adapter. Do not place the AC adapter on top of things that trap heat 

such as carpets, blankets, etc. Keep the AC adapter away from direct sunlight and heat sources such as heaters.  

Not doing so may result in fire.

•  Do not touch with bare hands. Doing so may result in burns.
•  Before moving the monitor, be sure to turn off the power switch, disconnect the power plug from the power outlet, 

and wait until it has cooled completely.

Do not suspend the AC adapter in midair.

Using it while suspended in midair may result in fire or electric shock.

Periodically clean the area around the power plug and the ventilation slot of the monitor and the AC 
adapter.

Dust, water, or oil on the plug may result in fire.

Unplug the unit before cleaning it.

Cleaning the unit while it is plugged into a power outlet may result in electric shock.

If you plan to leave the unit unused for an extended period, disconnect the power cord from the wall 

socket after turning off the power switch for the safety and the power conservation.

This product is only suitable for a patient environment, but not for contact with a patient.

Содержание RadiForce RX850

































Отзывы: