Eizo RadiForce RX270 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 41

background image

Appendix

39

Information for Radio Interference

For U.S.A, Canada Only

FCC Supplier’s Declaration of Conformity

We, the Responsible Party

Company: EIZO Inc.

Address: 5710 Warland Drive, Cypress, CA 90630

Phone: (562) 431-5011

declare that the product

Trade name: EIZO

Model: RadiForce RX270

is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

Note

Use the attached specified cable below or EIZO signal cable with this monitor so as to keep
interference within the limits of a Class B digital device.

• AC Cord

• Shielded Signal Cable (enclosed)

Canadian Notice

This Class B information technology equipment complies with Canadian ICES-003.

Cet équipement informatique de classe B est conforme à la norme NMB-003 du Canada.

«
...
37
38
39
40
41
»

Содержание RadiForce RX270










































Отзывы:

Нет отзывов

Похожие инструкции для RadiForce RX270

Бренд: NCR Страницы: 54

Бренд: Digitensio Страницы: 70

SmartGLCD 240x128

Бренд: mikroElektronika Страницы: 37

Бренд: OSEE Страницы: 28

ProLite T1932MSC

Бренд: Iiyama Страницы: 1

Бренд: BenQ Страницы: 44

grass valley MV-831

Бренд: Belden Страницы: 2

Бренд: OmniMetrix Страницы: 6

Бренд: Postium Страницы: 34

Бренд: Uniden Страницы: 24

Бренд: Xineron Страницы: 16

Бренд: INNOLIVING Страницы: 76

Бренд: AOC Страницы: 1

Бренд: Atari Страницы: 22

Бренд: A&D Страницы: 71

Бренд: Epson Страницы: 250

Бренд: Epson Страницы: 296

Бренд: Epson Страницы: 102

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды