English
15
Chapter 1 Introduction
1-3. Controls and Functions
4
7
8
9
10
12
3
14
13
2
1
15
16
5
11
6
Approx. 30°
1. Integrated Front Sensor
(Movable)
This sensor is used to perform calibration and Grayscale Check.
2. Ambient Light Sensor
This sensor measures environmental illumination. Environmental illuminance
measurement is performed using the RadiCS / RadiCS LE quality control software.
3. RadiLight Focus
Removable spotlight.
4. Operation switches
Displays the operation guide. Set menus according to the operation guide.
5. switch
Turns the power on or off.
The switch indicator is lit when you turn the power on. The indicator color differs
depending on the monitor's operation status.
Green: Normal operation mode, Orange: Power-saving mode, Off: Main power /
power turned off
6. RadiLight Area
Built-in backlight function of the monitor. This light illuminates the room indirectly from
the back of the monitor.
7. Stand
The height and angle can be adjusted.
8. USB downstream port
Connect it to a USB device.
9. Spotlight connector
Used for connecting RadiLight Focus.
10. Security lock slot
Complies with Kensington’s MicroSaver security system.
11. Cable holder
Holds the monitor cables.
12. Main power switch
Turns the main power on or off.
: Off, : On
13. Power connector
Connects the power cord.
14. HDMI connector
Connect it to the PC. The PinP sub-window display is supported.
15. DisplayPort connector
Connect it to the PC.
: Single display, One Cable PbyP, and the left window display for PbyP are
supported.
: Single display, the right window display for PbyP, and the sub-window display for
the PinP mode are supported.
16. USB upstream port
Connect this port to the PC when you use software that needs a USB connection or
connect a USB device (peripheral device that supports USB) to the USB downstream
port.
