Notice for this monitor
11
To Use the Monitor for a Long Time
Quality control
• The display quality of monitors is affected by the quality level of input signals and the
degradation of the product. Perform visual checks and periodic constancy tests
(including grayscale check) to comply with medical standards / guidelines according to
your application, and carry out calibration as necessary. Use of the RadiCS monitor
quality control software enables you to perform high-level quality control that meets
medical standards / guidelines.
• It takes about 15 minutes (under our measurement conditions) for the monitor display to
stabilize. Please wait 15 minutes or more after the monitor power has been turned on or
the monitor has recovered from the power saving mode before performing various tests
for quality control, calibration, or screen adjustment of the monitor.
• We recommend that monitors be set to the recommended level or lower to reduce
changes in luminosity caused by long-term use and maintain stable brightness.
Attention
• The display status of the monitor may change unexpectedly due to an operating error or
unexpected setting change. Using the monitor with the operation switches locked is
recommended after adjusting the screen of the monitor.
For details on how to set, refer to the Installation Manual (on the CD-ROM).
Cleaning
• Periodic cleaning is recommended to keep the product looking new and to prolong its
operation lifetime.
• Gently wipe off any dirt on the cabinet or LCD panel surface with a soft cloth soaked in a
small amount of water or one of the chemical solutions listed below or with
ScreenCleaner (available as an optional product).
Chemicals that may be used for cleaning
Material name
Product name
Ethanol
Ethanol
Isopropyl alcohol
Isopropyl alcohol
Chlorhexidine gluconate
Hibitane solution
Benzalkonium chloride
Welpas
Alkyldiaminoethylglycine
Tego 51
Glutaral
Sterihyde
Glutaral
Cidex Plus28
Attention
• Do not use chemicals on a frequent basis.
• Chemicals such as alcohol and disinfectant may cause gloss variation, tarnishing, and fading of
the cabinet or LCD panel surface, and also quality deterioration of the image.
• Never use thinner, benzene, wax, or abrasive cleaner as they may damage the cabinet or LCD
panel surface.
• Do not let chemicals come into direct contact with the monitor.
To Use the Monitor Comfortably
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
