Eizo RadiForce MX243W, Инструкция по эксплуатации

Страница: 19 / 37

Installation / Connection | 2
19
2 Installation / Connection
2.1 Before installation
Carefully read PRECAUTIONS [
}
3] and always follow the instructions.
If you place this product on a lacquer-coated desk, the color may adhere to the bottom of
the stand due to the composition of the rubber. Check the desk surface before use.
2.1.1 Installation conditions
When installing the monitor in a rack, ensure that there is adequate space around the sides,
back and top of the monitor.
Attention
• Position the monitor so that there is no light to interfere with the screen.
2.2 Connecting Cables
Attention
• Check that the monitor, PC, and peripherals are powered off.
• When replacing the current monitor with this monitor, see Compatible Resolutions [ } 25] to
change the PC settings for resolution and vertical scan frequency to those that are available for
this monitor, before connecting the PC.
1. Connect signal cables.
Check the shapes of the connectors, and connect the cables. After connecting the DVI
cable, tighten the fasteners to secure the connector.
Signal cable: DD200
or
Signal cable: PP300
(optional)
DisplayPort DVI DVI DisplayPort