11
Chapter 2 Adjusting the Screen
●
Enabling or disabling Hybrid Gamma PXL
When the Hybrid Gamma PXL function is enabled, this product automatically differentiates between
monochrome and color parts of the same image at a pixel level, and displays a color image using the
gamma value for color image display.
Setting Range
On, Off
Procedure
1. Select “CAL Switch Mode” from the Setting menu, then select .
2. Select “Hybrid Gamma PXL”, then .
3. Select “On” or “Off”, then select .
●
Adjusting the contrast
The brightness of the screen is adjusted by varying the video signal level.
Setting Range
0 to 100 %
Procedure
1. Select “CAL Switch Mode” from the Setting menu, then select .
2. Select “Contrast”, then .
3. Specify the setting using
or
.
4. Select after completing the setting.
Note
•
When the contrast is set to 100 %, all the color gradations are shown.
•
When adjusting the monitor, it is recommended to perform brightness adjustment, which does not lose
gradation characteristics, prior to contrast adjustment.
•
Perform contrast adjustment in the following cases.
- If the screen is too bright even when the brightness is set to 0 %
