12
Chapter2AdjustingScreens
●
To adjust brightness
The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD back
panel).
Setting Range
0 to 100%
Procedure
1. Choose “Mode” from the Adjustment menu, and press
.
2. Choose “Brightness” from “Mode”, and press
.
3. Use or for adjustment.
4. Press
to exit.
●
To set the mode in the monochrome display area
The mode suitable for the monochrome image display area can be set (see
“To select the display mode (CAL
).
Setting Range
DICOM, CAL1, CAL2
Procedure
1. Choose “Mode” from the Adjustment menu, and press
.
2. Choose “Gray Area” from “Mode”, and press
.
3. Use or for adjustment.
4. Press
to exit.
Attention
• After the configuration in the display area, you cannot select any mode for which Mode Preset is “Off” (see
Enabling/Disabling Mode Selection” (page 14)
).
Note
• The Brightness is the same as the value for the mode selected. To change the brightness, use the mode selected for
adjustment.
