32
Chapter 4 Using Smart Function
Chapter 4 Using Smart Function
4-1. Setting “Smart Detection”
This function allows you to select the area on the screen to which the “Smart Resolution” or “Smart
Insight 2” setting is applied (only animated images or whole screen).
Setting
Function
Video
Detects the animated images on the screen, and applies the setting only to the detected
area.
Full Screen
Applies the setting to the whole screen.
Procedure
1. Press
on the remote control.
The “Smart Functions” menu appears.
2. Select “Smart Detection”, and press
.
The “Smart Detection” menu appears.
3.
Select “Video” or “Full Screen” with
or
.
4. Press
to exit.
Note
•
Under the following conditions, the setting for “Smart Detection” is fixed to “Full Screen”.
- At interlace signal input
- “Cinema” is selected from the color mode.
• “Full Screen” should be set to display animated images using the whole screen.
