23
Chapter 4 Administrator Settings
4-2. Functions of the “Administrator Settings” Menu
Function
Description
Auto Input Detection
This product automatically recognizes the connector through which PC signals are
input and displays images on the screen accordingly. When a PC is turned off or
enters power saving mode, any other available signal is displayed automatically.
When this function is set to “Off”, the monitor displays the signal from the selected
connector regardless of whether a signal is input or not. In this case, select the input
signal to display using the operation switch on the front of the monitor.
Setting Range: On, Off
Note
•
This product automatically recognizes the connector through which PC signals are
input, and displays images on the screen accordingly regardless of whether this
function is set to On or Off just after the power code is connected.
•
When this function is set to “On”, the monitor only enters power saving mode after
all connected PCs have entered power saving mode or have been switched off.
Compatibility Mode
Depending on the PC and graphics board, the input signal may not be detected and
the monitor may not recover from power saving mode. If this happens, set this function
to “On”.
Setting Range: On, Off
On-Screen Logo
When the monitor is turned on, the EIZO logo appears on the screen.
When this function is set to “Off”, the EIZO logo does not appear.
Setting Range: On, Off
Key Lock
In order to prevent changes to settings, the operation switches on the front of the
monitor can be locked.
Setting Range: Off, Menu, All
•
“Off”
Enables all switches.
•
“Menu”
Locks the switch.
•
“All”
Locks all switches except the power switch.
