Eizo FLEXSCAN L997 -, Руководство пользователя

Страница: 14 / 60

2. CABLE CONNECTION
2-1. Before Connecting
Before connecting your monitor to the PC, change the display screen settings ( Resolution and frequency) in
accordance with the APPENDIX charts.
●
When your computer and display support VESA DDC, the suitable resolution and the refresh rate are
set by just plugging your display into the computer without any manual settings.
2-2. Connecting the Signal Cable
●
Be sure that the power switches of both the PC and the monitor are OFF.
1. Plug the signal cable into the connector at the rear of the monitor and the other end of
the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable Connector of the PC PC
Signal Cable
(FD-C16 enclosed)
Video Output
Connector / D-Sub mini 15 pin
Input Connector
(monitor) / DVI
●
Standard graphics card
●
Power Macintosh G3 (Blue & White) / Power
Mac G4 (VGA)
Digital Input
Signal Cable Connector of the PC PC