Eizo FlexScan L 352T L352T-C L352T-C, Руководство пользователя

Страница: 14 / 43

English
2.
Plug the enclosed touch panel cable into the RS-232C port of the
monitor. Then, plug the other end of the cable into the COM port of
the computer.
3.
Plug the power cord into the power connector on the rear of the
monitor. Then, plug the other end of the cord into a power outlet.
WARNING
Use the enclosed power cord and connect to the standard
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may cause in fire or electric shock.
The equipment must be connected to a grounded main
outlet.
Not doing so may cause in fire or electric shock.
4.
Turn on the monitor’s main power and then switch on the PC's
power.
The monitor’s power indicator will light up (blue).
If an image does not appear, refer to the “6. TROUBLESHOOTING” (p.29) for
advice.
Whenever finished, turn off the PC and the monitor.
NOTE
•
Adjust brightness of the screen depending on the brightness of your environment.
Too dark or too bright of a screen can cause eyestrain.
•
Be sure to take adequate rests. A 10-minute rest period each hour is suggested.
•
For the users with gloves, we recommend to use touch panel pointer, “TP1”
(optional). Regarding the installation, please refer to the User’s Manual of TP1.
14
2. CABLE CONNECTION