32
Chapter4PowerSavingFunctions
●
To have further reduced power consumption
When all the conditions below are met and the monitor shifts to the power saving mode, the power
consumption is reduced to approx. 0.1 W.
• The analog signal (D-Sub) is displayed.
• “PowerManager” - “Off Timer”: Off
• “Monitor Settings” - “Input Signal”: Manual
• “Sound” - “Power Save”: Sound Off
• EcoView NET is not installed on your PC.
Note
• This function can be disabled with the following procedures.
1. Press toturnoffthemonitor.
2. Press holding
downtoturnonthemonitor.
Eachtimetheoperationenables/disablesthisfunctionalternatively.
Whenthefunctionisdisabled,“*”isdisplayedonthemenutitleof“Information”oftheSettingmenu
(see
“6-3.DisplayingMonitorInformation”(page41)
).
●
Audio Output
This monitor allows you to turn off the audio output from the speakers / headphone at the power saving
mode.
Procedure
1. Choose “Sound” in the Setting menu, and press
.
2. Choose “Power Save” in the “Sound” menu, and press
.
The “Power Save” menu appears.
3. Select “Sound On” or “Sound Off” with or .
4. Press
to exit.
Attention
• No audio is output while the monitor is in the Power Saving mode, if input signal and sound source are of DisplayPort
(EV2335W only).
4-2. Setting Power Indicator
This function allows you to set the power indicator (blue) ON / OFF in the monitor ON condition.
Procedure
1. Choose “Monitor Settings” in the Setting menu, and press
.
2. Choose “Power Indicator” in the “Monitor Settings” menu, and press
.
The “Power Indicator” menu appears.
3. Select “On” or “Off” with or .
4. Press
to exit.
