1-3. Controls and Functions
●
Front / Back
1
2
4
3
1. ECDIS Indicator
When the monitor brilliance is set to the ECDIS adjustment value, the
letters "ECDIS" light up green.
Note
• The ECDIS Indicator will not light up in the following situations:
- When the ECDIS Indicator is set to "Off"
-
When Color Mode is set to "Custom"
- When the monitor brilliance differs from the ECDIS adjustment
value.
-
When the wrong signal is inputted
• While the product can be installed in the range of 0° to 90°, the
ECDIS factory shipping adjustment is performed with the monitor in a
vertical position.
2. Power lamp
Indicates the operation status of the monitor.
When green: Normal operation mode
When flickering green: Power saving mode
When turned off: Power off
3. Cooling fan
Fans to cool the monitor. Operates when the product interior reaches a
high temperature.
4. Buzzer
Can be activated to emit warning beeps by system-side control.
Note
•
For details on system-side control, contact your local EIZO
representative.
English
9
Chapter 1 Introduction
