2-4. ECDIS setup
This monitor can be integrated into ECDIS (Electronic Chart Display and Information System). To
integrate, the following information is required:
•
ECDIS Color Tables Specifications
•
Monitor Control Commands Specifications
For details, contact your local EIZO representative or visit our website (www.eizoglobal.com) to send us
an inquiry.
Monitor setting is required to display in compliance with ECDIS standards. For details, refer to the monitor
User’s Manual (in the CD-ROM).
2-5.
Turning Power Off
1.
Hold down the
button for five seconds or more.
The power turns off after the remaining time until it turns off has been displayed on the screen.
Control buttons other than go off.
Attention
•
Pull out the AC power cord and DC electrical wire to cut off power completely.
22
Chapter 2 Installation / Connection
