18
Chapter5Reference
Chapter 5 Reference
5-1. How to Replace the Cooling Fan
The cooling fan in this product can be replaced according to the following procedure.
Attention
• Be sure to follow the procedure when replacing the fan. Note that EIZO Corporation assumes no responsibility for any
damages caused due to improper handling of this product.
Note
• Please contact your local EIZO representative for replacement parts.
Procedure
1.
Remove the monitor from its enclosure.
1. Remove the screws that secure the monitor to the enclosure.
2. Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down.
2.
Remove the fan cover.
Remove the four screws that secure the cover.
3.
Remove the fan.
1. Disconnect the cables connected to the monitor.
Attention
• Grip the connector part when disconnecting cables. Pulling on the cable part may damage the cable.
2. Remove the four screws that secure the fan.
Connector
Connector
1.
1.
2.
2.