Eizo DURAVISION FDS1701, Руководство пользователя

Страница: 24 / 28

Chapter 5 Reference
5-3. Preset Timing
The following table shows the factory preset video timing of the PC.
ATTENTION
Display position may be deviated depending on the PC connected, which may require screen adjustment using
Setting menu.
If a signal other than those listed in the table is input, adjust the screen using the Setting menu. However, screen
display may still be incorrect even after the adjustment.
When interlace signals are used, the screen cannot be displayed correctly even after screen adjustment using the
Setting menu.
•
•
•
Resolution
Applicable
signal
Frequency Polarity
Dot clock :
MHz
Horizontal :
kHz
Vertical :
Hz
Horizontal Vertical
720 × 400 VGA TEXT 28.33 31.47 70.09 Negative Positive
640 × 480 VGA 25.18 31.47 59.94 Negative Negative
640 × 480 VESA 31.5 37.86 72.81 Negative Negative
640 × 480 VESA 31.5 37.50 75.00 Negative Negative
800 × 600 VESA 36.00 35.16 56.25 Positive Positive
800 × 600 VESA 40.00 37.88 60.32 Positive Positive
800 × 600 VESA 50.00 48.08 72.19 Positive Positive
800 × 600 VESA 49.50 46.88 75.00 Positive Positive
1024 × 768 VESA 65.00 48.36 60.00 Negative Negative
1024 × 768 VESA 75.00 56.48 70.07 Negative Negative
1024 × 768 VESA 78.75 60.02 75.03 Positive Positive
1152 × 864 VESA 108.00 67.50 75.00 Positive Positive
1280 × 960 VESA 108.00 60.00 60.00 Positive Positive
1280 × 1024 VESA 108.00 63.98 60.02 Positive Positive
640 × 480 MAC 30.24 35.00 66.67 Negative Negative
832 × 624 MAC 57.28 49.72 74.55 Negative Negative
1152 × 870 MAC 100.00 68.68 75.06 Negative Negative
1280 × 960 MAC 126.20 74.76 74.76 Positive Positive
640 × 400 PC-9801 21.05 24.83 56.42 Negative Negative
640 × 400 PC-9821 AP2 25.18 31.48 70.10 Negative Negative