15
Chapter 2 Configuring from the monitor screen
●
To manually register network cameras
Register network cameras manually for cases described below.
• When a network camera is installed in a subnet differing from the subnet of the monitor
• When settings such as network settings of a registered network camera have been changed
• When registering a video encoder which supports multiple channels
Procedure
1.
Select “Manual Registration”.
A list of network cameras currently registered is displayed.
Registered cameras are displayed.
1
2
3
2.
Select the network camera to configure at “Camera Name”.
When registering a network camera installed in a subnet differing from the subnet of the monitor, select an
available number (with no network camera registered). For a network camera that is already registered,
select the network camera of which to change settings.
3.
Select “Settings”.
The network camera setting screen is displayed.
