Operation
7.12 "Force Mode" menu
CuratOR LX491W
Instructions for Use, 02/2018
49
7.12 "Force Mode" menu
Force Mode is used to set the timing of video sources that cannot be displayed with the tim-
ings saved in the monitor.
Function
Values
Description
Horizontal Resolution
Set the horizontal resolution in the active resolution
range.
Vertical Resolution
Set the vertical resolution in the active resolution
range.
Total horizontal lines
If the resolution is known, this can be used as the ap-
proximation value. The following applies: "Total hori-
zontal lines" > "Horizontal resolution".
A larger "Horizontal resolution" can result in the im-
age being split vertically.
Horizontal blank pixel
Set the horizontal blanking interval.
Vertical blank pixel
Set the vertical blanking interval.
Mode
Active / Start /
Inactive
Default: Inactive
Set Force Mode
•
When "Active" is selected, the specified timing
values are applied with "Execute function...".
•
Force Mode is switched off when "Inactive" is se-
lected.
•
When "Start" is selected, the start values for the
timing are determined using "Execute function...".
See also Determining the timing data
Execute function...
When "Start" is selected in Mode, the set video reso-
lution is executed.
Содержание CuratOR LX491W
Страница 69: ......
