19
Chapter 2 Installation / Connection
2-4. Connecting the Cables
1.
Connect the cables appropriate for the device to be used.
If you connected the HDMI cable to the monitor, be sure to secure the HDMI cable with the HDMI
cable holder.
HDMI cable holder
Attention
• Do not use damaged cables.
• Do not connect or disconnect the signal cable while the monitor is turned on.
• The SDI terminal, DVI-D terminal, DisplayPort terminal and HDMI terminal are vulnerable to static electricity,
therefore exercise caution when installing. When working with the monitor, be sure to observe the following:
- Do not touch the connector pins.
- Do not touch pins at the end of any cable connected to a connector.
- Take anti-static precautions such as using an anti-static wrist strap when working.
