10
Chapter 2 Advanced Adjustments / Settings
●
System Config
Settings for devices.
Function
Settings
Description
Function
F1
POP
Display Direction
Scan Size
Gamma Select
Color Gamut
Noise Reduction
Zoom
H Parallax
V Parallax
Signal Format
Undef
Sets functions assigned to function buttons.
•
“POP”
Switches between dual screen (P out P: Splits screen
horizontally) and single screen display.
•
“Display Direction”
Rotates / flips the screen.
•
“Scan Size”
Switches between the setting values of “Video Config”
and “Noise Reduction” in sequence.
• “Gamma Select”
Switches the setting values of “Video Config” -
“Gamma” in sequence.
•
“Color Gamut”
Modulates the color reproduction range.
• “Noise Reduction”
Switches between the setting values of “Video Config”
and “Noise Reduction” in sequence.
•
“Zoom”
Expands the current view on the display.
• “H Parallax
Adjusts Horizontal Parallax.
• “V Parallax”
Adjusts Vertical Parallax.
•
“Signal Format”
Sets signal format when in 3D mode.
• “Undef”
No function assigned.
F2
F3
F4
SDI Main
Stream 1
Stream 2
Sets the picture on main screen for dual-stream SDI signal.
This is also applied to the single screen display.
SDI Sub
Stream 1
Stream 2
Sets the picture on the subscreen when dual-stream SDI
signal is input.
Status Display
Continue
3Sec
Off
Whether information about the current input signal and
terminal name is displayed.
Information about the resolution at the PC signal input is
also displayed.
Power On Setup
Last
PRESET1 to
PRESET5
FACTORY
USER1 to USER10
Settings when switching on can be set in advance.
•
“Last”
Starts with last saved status.
•
“PRESET1” to “PRESET5”
Start up with 5 types of preset settings, stored in
advance in the monitor as fixed data.
•
“FACTORY”
Returns to factory settings.
•
“USER1” to “USER10”
Starts up with status saved to USER. It is possible to
store 10 types of data for each USER.
