Setting of PQ Option and Display
This section describes the setting of PQ Option and the relation between the input signal (10 bits:
0 - 1023) and the brightness displayed on the monitor.
Note
•
This relation assumes that the input signal is full range (and that "Input Range" in "Signal" is set to "Full").
●
300 cd/m
2
Clipping, 500 cd/m
2
Clipping, and 1000 cd/m
2
Clipping
0
100
200
300
400
500
600
700
800
900
1000
1100
1200
693
637
770
O
ut
pu
t Bri
gh
tn
es
s
(cd
/m
²)
Input Video Level
PQ Curve
300 cd/m² Clipping
500 cd/m² Clipping
1000 cd/m² Clipping
0
256
512
768
1023
•
Set the brightness to the specified value to
display properly.
- Example: When PQ Option is set to 300cd/
m
2
Clipping, set the monitor brightness to
300 cd/m
2
.
●
4000 cd/m
2
Emulation and 10000 cd/m
2
Emulation (Monitor brightness setting: 1000
cd/m
2
)
O
ut
pu
t Bri
gh
tn
es
s
(cd
/m
²)
Input Video Level
0
500
1000
1500
2000
2500
3000
3500
4000
4500
0
256
512
768
1023
924
PQ Curve
4000 cd/m² Emulation
10000 cd/m² Emulation
•
This setting is used for a temporally check.
- Example: When PQ Option is set to
4000cd/m
2
Emulation, the representation of
gradation is equivalent to that of the monitor
with the maximum brightness of 4000 cd/m
2
.
In this case, the representation of gradation
is decreased according to the brightness
setting of this monitor because it has the
maximum brightness of 4000 cd/m
2
or less.
22
Chapter 3 Advanced Adjustments/Settings
