Eizo COLOREDGE CG303W, Руководство пользователя

Страница: 6 / 42

6
1. Introduction
1. Introduction
Thank you very much for choosing an EIZO Color Monitor.
1-1. Features
•
29.8 inch class wide screen format LCD
•
Wide color gamut of 98% of Adobe RGB
• WQXGA (2560 × 1600) display compliant
•
HDCP signal (SIGNAL2) compliant
• Dual-display compliant by introducing dual-input system (DVI-D × 2 connectors)
•
DVI digital input (TMDS) compliant
• Horizontal scan frequency: 26 - 100 kHz
•
Vertical scan frequency: 29.5 - 30.5Hz, 59 - 61Hz (VGA TEXT: 69 - 71 Hz)
• Resolution: 2560 dots × 1600 lines
•
Compatible with frame synchronization mode
*1 (29.5 - 30.5Hz, 59 - 61Hz)
• Smoothing (soft - sharp) function
•
The provided "ColorNavigator" calibration software enables you to calibrate monitor characteristics and
generate ICC profiles (for Windows) and Apple ColorSync profiles (for Macintosh) (refer to the EIZO LCD
Utility Disk)
•
FineContrast modes, to select the most suitable mode for screen display
•
Height adjustable stand
•
Portrait/Landscape display available (rotate 90 degrees clockwise)
•
Attaching the "Adjustment Certificate" to describe the grayscale and uniformity characteristics of the
monitor individually
• Monitor hood attached
•
Color Vision Deficiency Simulation Software "UniColor Pro" supported
(This software can be downloaded from http://www.eizo.com )
*1 Compatible frequency differs depending on your graphics board.
CAUTION
Be careful of the following points when using the monitor hood.
•
Do not carry the monitor with the hood attached.
While carrying the monitor, the hood may fall or slip off, which may result in injury or equipment
damage.
•
Close the open/close cover until it contacts the stopper.
If the cover is not closed properly, the ventilation slots on the monitor will be covered and proper
airflow will be prevented. This may cause overheating inside the monitor and may result in fire, electric
shock, or equipment damage.
•
Do not place any objects on the hood.
If the hood falls or slips off or the monitor falls over, it may result in injury or equipment damage.
•
Do not rotate the monitor into the portrait position.
Doing so may cause the hood to slip off, which may result in injury or equipment damage.