Eitan Q Core Sapphire, Руководство пользователя

Страница: 232 / 294

Sapphire Infusion Pump User Manual 231
Using the New Patient Feature
The Sapphire pump allows you to associate infusions to a specific patient.
When the New Patient feature is enabled, and either a New Infusion or a PreSet
program is selected, the pump will prompt you to indicate whether the infusion to be
programmed is for a new patient or not. When selecting Repeat Last Infusion the New
Patient screen will not appear, and the pump will indicate that the infusion to be
repeated will be used for the last patient selected.
When a new patient is selected, entries associated with the patient can be tracked in
the Event Log (
Viewing the Event Log
on page
215
). In addition, when Repeat Last
Infusion is used, the pump calculates the accumulated volume infused (
Accumulated
VI)
for all infusions associated with the patient and the
Delivery History
. When a new
patient is selected, the Accumulated VI and Delivery History values are automatically
cleared (for more information, refer to
Monitoring the Accumulated Volume Infused (Shift's
Total)
on page
232
).
The current accumulatedDelivery history can be viewed via the Options menu. When
an infusion is running, the DeliveryHistory can be accessed via the View/Edit soft key in
the toolbar (for more information, refer to the
Viewing Delivery History
on page
216
).
> To s e l e c t a N e w P a t i e n t :
1.
From the Start Up screen, select
New Infusion
or
PreSet Programs
.
2.
On the New Patient screen, select
Yes
.
The New Patient feature can be enabled/disabled by technicians
only.