manualshive.com logo in svg

Eitan Q Core Sapphire, Руководство пользователя, Страница: 213 / 294

Поделиться
Скачать
Eitan Q Core Sapphire Скачать руководство пользователя страница 213

Options Menu: Configuring, Viewing and Testing

212

Viewing System Parameters

The 

View

 

system

 screen allows you to view current system settings and infusion 

parameters, and update selected settings. You can navigate through the pages of 
settings, by pressing the 

Next

 and the 

Back

 function keys.

The following settings appear in all delivery modes: 

 

Setting

Description/Notes

Infusion Values

Displays all the programmed parameters of the current infusion, 
including rate in mL/h. Applicable only on an active infusion, or 
during Standby.
Pressing 

>

 displays the parameters. 

Alarm volume

The volume of the auditory alarm signal (

Maximum

 or 

Minimum

). The setting can be modified by pressing 

>

, and then 

selecting a setting.

Occlusion

The level of downstream pressure that triggers an occlusion 
alarm. For more information, refer to 

Managing Alarm Settings 

on 

page 

200

.

The setting can be modified by pressing 

>

, entering a value using 

the keypad, and then pressing 

OK

.

Authorization

Current authorization lock level. For more information, refer to 

Managing Authorization Levels 

on page 

220

.

The setting can be modified by pressing 

>

, selecting a setting, 

and then pressing 

OK.

 Password entry is required to change the 

authorization.

Current CCA

The current CCA, as pre-selected by the user, and used for the 
current infusion. Appears only when Drug Library is loaded.
For more information, refer to 

Clinical Care Area (CCA) 

on page 

235

.

Next CCA

The next CCA appears only when the Drug Library is loaded, and 
the user changed the CCA during an infusion. 

Note:

 The next CCA will apply only after the infusion has ended.

Applicable only during an active infusion, or during Standby.
For more information refer to 

Clinical Care Area (CCA) 

on page 

235

.

Содержание Q Core Sapphire







































































































































































































































































































Отзывы:

Нет отзывов